The Sand Sweeper - Completed

The Sand Sweeper, version #1

The Sand Sweeper, version #2

As an abstract artist, one thing I sometimes struggle with is getting too literal. This unfolding saga has exacerbated this problem, especially if I name a piece before it is completed. I then agonize over making the piece fit the title. With this one I had partially built the vessel and hung a "tassel" from the keel, including the "brush" and the quartz crystal, and this had led to the name.

Now, how to complete it! I got stuck until I got frustrated and angry (ok, I got mad!!) and that's when I'm able to throw caution to the wind and just play "what if?"

I find I tend to set problems for myself, simply because I get a lot of satisfaction from solving problems. In this piece I had created a very strong asymmetry. With jewelry one has to establish not just visual balance but also physical balance - you don't want this thing swinging around as you walk and hanging on an angle, especially since I had restrained the asymmetry with very symmetrical links going up to the neck. The kinetic (yes, it spins) polymer clay "wheel" sitting at the stern of the vessel increased the "weight" on the left side, but continued the visual line up from the tassel, so it "felt" good there. 

I needed considerable physical weight to balance the right, also I needed something relatively dark and not too small to balance the visual weight. I chose a large fossilized shark's tooth, discovered on a beach in Ponte Vedra, Florida, during one of many times my family exiled me to the beach to dispel my depressive episodes (I have over 6,000 shark's teeth! Maybe that says a lot about my state of mind at that time! See, I need the beach - it keeps me sane!)

The effect was that of an anchor, but it created a problem - it visually takes your eye down rather than up to the face, and that's not good in jewelry.

Furthermore, the piece hung too low for such a relatively large focal point, so I enlisted the eye of a fellow artist (my younger daughter - I knew all the difficulties of raising children would pay off someday!) and the decision was made that the piece had to hang higher, which meant the two mokume gane beads had to go. 

The shark's tooth "anchor" was exchanged for a heavy, dark glass bead bracketed by two heavy copper endcaps to bring the eye up on the right.

The three white seaworm casings  with swarovski crystals at the tips are very kinetic and also move along the black wire, creating a strong, light focal area as well as eye-catching movement. They also add a feeling of fragility to an otherwise substantial piece.

Detailed images follow:

 

Pretty in Pink

More Burlesque Blend pieces as I prepare to teach these upcoming workshops (yes, I'm anal-retentive, obsessive-compulsive!) The interesting thing about this particular colour combination is how beautiful it looks on all types of skin. Pasty-white or deeply-tanned, this just glows.

The design in this piece works well for me. The asymmetry of the pattern in the focal piece keeps the necklace from becoming boringly symmetrical; the large amount of pink in the two pieces flanking either side of the focal element draw the eye away from the middle and up towards the face; the next two flanking pieces, with the diagonal patterning moving diagonally down and out stop the eye from leaving and pulls it back to the central elements.

The finishing details often get neglected because one gets so focused on the clay technique. In this case, although the pink is very cool, suggesting silver would be a good accompaniment, the metallic sparkle in the 3 central pieces is more muted and casts a bit of a gold tint, which knocks back the colour intensity in the polymer and also allows me to choose spacer crystals that are metallic gold-tone with a hint of pink interference. These crystals are flanked on each side by an oblong, faceted black crystal and this combination really enhances the sparkling feel of this piece.

To finish off the necklace, round black agates are used instead of crystals, keeping the focus in the main polymer area and providing a very comfortable feel on the neck. Notice, though, that it is not just a bland, monotonous strand of beads. These agates are broken up periodically with a pink/gold interference tube seed bead, again adding interest, but not detracting from the main attraction.





I'm working out more colour combinations for variety for the students. It's not logistically feasible to structure a workshop so every student can choose every element, but colour is very personal, and where possible, I like to provide that choice while maintaining limits on size, shape, pattern, etc., as seen here:

Final Take - The Pegasus Necklace

The Pegasus Necklace



In reassembling the necklace with black agate beads and brass spacers between the polymer elements, I feel it looks more dressy this way. I do the final sanding and buffing, keeping the high gloss for the Burlesque Blend accents and leaving a fairly matte surface for the black areas. The contrast between matte and shine, between flat and glitter, between dark and light, between solid and pattern pleases me.  

The beads look fairly substantial but the work in making them "hollow" keeps the necklace from being heavy, so the time and effort to assemble the beads with internal support but no solid core was worth it.

The Pegasus Necklace

The beads are done and now the final decisions involve the assembly. I've strung the beads on brass coated cable, but feel the cable looks too frail next to the overall look so I'll use softglass cord to go from the end beads to the brass hook-and-eye clasp. The decision involves the spacers. I've used leftover clay to make clay discs. I need a small black agate round bead to push the spacers away from the central bead. I'll restring the whole piece using a "slicker" alternative - brass spacers with a larger black agate bead in between - to see which one conveys the artistic "feel" I'm looking for. Here is the first alternative assembly:

The Pegasus Necklace



The Creative Process - Designing Museum Quality Fine Art Jewelry

Sometimes ideas flow like a raging river. Other times you feel "dry as a stone", to quote Virginia Cobb. Some artists keep a sketchbook by their bedside, others journal their ideas. Me, well, I usually can't find what I need when the muse beckons. I start out with great intentions, but my sketchbook by my bedside is empty because the massive wave of creativity that washes over me as I drift off happens when I'm drifting off! I have about 50 sketchbooks/notebooks/journals, stuffed full of copy paper/napkins/junk mail covered with ideas, both visual and verbal, scattered throughout my environment. I pity the person trying to sort and categorize my creative thoughts/ideas after I'm "gone". There is no rhyme or reason; there is no logical order or linear time sequence. My mind works on the explosion process, images morphing into objects or wildly splattering across a canvas. Words appear and merge with color, contrasts jarring and exciting through texture or value or color. So I thought I would take you along with me on my process of creating this fall jewelry collection.

Yesterday's focal element didn't appear first. Here is the process unfolding in one sketchbook:

This is a shape that has appeared frequently in my abstract paintings. I really love this shape. This sketch led to:

and

Now I'm in full gear and thinking about the whole piece, needing a central element:

The top drawing works out the logistics of assembling the round focal element featured in yesterday's blog. Studying that piece gives me ideas for the rest of the necklace, and the color ideas and shape and size for the side pieces get finalized on the bottom.

As you can see, I'm a process artist. The act of creating leads to more creating - but the pragmatist is always there, waving a finger at me, reminding me these things have to work in real life, so now it's time to make the prototypes for the side pieces.

More about this process tomorrow.

Putting Together a Collection for Fall 2012 Fashion

I've been asked, by an exclusive clothing boutique in Montreal, to put together a Fall 2012 Jewelry Collection to sell in their store. I don't mind telling you, I'm excited! I'm thinking of changing my name - something chic - The Artist Formerly Known as Vickie????? I'll work on it.

The first color palette I'm working with is black and gold and bronze. I need to stay fairly elegant, yet arty and exclusive, so I've got a few ideas I'll show you over the next few days.

This is a focal piece for a necklace that I can already see in my mind's eye. It uses up some scraps from different techniques, which is always great, but requires a lot of hand cutting and hand shaping, so this will definitely be the centre of a very "arty piece".